# Latest **URL:** https://forum.line-us.com/latest.md?page=3 [Latest](https://forum.line-us.com/latest.md) · [Categories](https://forum.line-us.com/categories.md) **Page:** 4 --- ## [Can we view/capture generated GCODE from the official app?](https://forum.line-us.com/t/can-we-view-capture-generated-gcode-from-the-official-app/464)
**Author:** [@stridera](https://forum.line-us.com/u/stridera)\ **Replies:** 1\ **Last updated:** [July 18, 2019, 4:41pm UTC](https://forum.line-us.com/t/can-we-view-capture-generated-gcode-from-the-official-app/464 "2019-07-18T16:41:46Z")
I’m building a little app that draws a few pre-configured symbols. I like the feature in the general app to load an image, trace it, and repeat it, but I was hoping to capture each of these and send them as an individua… --- ## [Possible to connect directly?](https://forum.line-us.com/t/possible-to-connect-directly/459)
**Author:** [@stridera](https://forum.line-us.com/u/stridera)\ **Replies:** 2\ **Last updated:** [July 5, 2019, 7:21pm UTC](https://forum.line-us.com/t/possible-to-connect-directly/459 "2019-07-05T19:21:56Z")
I was hoping to control this via a Raspberry Pi while on battery power. To save power I was hoping there was a way to power/control it over USB. Also, it would be nice not to have to put it in local network “setup” mod… --- ## [Has anyone tried connecting this to a vector based software?](https://forum.line-us.com/t/has-anyone-tried-connecting-this-to-a-vector-based-software/455)
**Author:** [@Jeff](https://forum.line-us.com/u/Jeff)\ **Replies:** 2\ **Last updated:** [June 24, 2019, 11:03pm UTC](https://forum.line-us.com/t/has-anyone-tried-connecting-this-to-a-vector-based-software/455 "2019-06-24T23:03:49Z")
I’d love to be able to upload a vector illustration and have Line-us trace it for me. Or connect it directly to Adobe Illustrator? --- ## [Setting up issues](https://forum.line-us.com/t/setting-up-issues/447)
**Author:** [@taylorjames](https://forum.line-us.com/u/taylorjames)\ **Replies:** 5\ **Last updated:** [June 14, 2019, 6:26pm UTC](https://forum.line-us.com/t/setting-up-issues/447 "2019-06-14T18:26:39Z")
we purchased our unit yesterday at London tech week. Looked lovely. However, back in the office we have unsuccessfully tried to set the device up with these devices; MacBook Air 2019 running current software MacBookPro… --- ## [Line us stops in the middle of a drawing](https://forum.line-us.com/t/line-us-stops-in-the-middle-of-a-drawing/440)
**Author:** [@leash](https://forum.line-us.com/u/leash)\ **Replies:** 3\ **Last updated:** [April 26, 2019, 8:56am UTC](https://forum.line-us.com/t/line-us-stops-in-the-middle-of-a-drawing/440 "2019-04-26T08:56:57Z")
Hi all, My line us stops in the middle of a draw most of the times and return home, also when start the draw its stops with the pen down 2-3 seconds then returns the drawing. Any ideas about what might be? I’ve already … --- ## [Plotting my drawing with line-us](https://forum.line-us.com/t/plotting-my-drawing-with-line-us/436)
**Author:** [@Karl](https://forum.line-us.com/u/Karl)\ **Replies:** 1\ **Last updated:** [April 14, 2019, 5:50pm UTC](https://forum.line-us.com/t/plotting-my-drawing-with-line-us/436 "2019-04-14T17:50:28Z")
Hi, I recently bought a line-us-tool. When I opend the app I discovered that there is no possibility to import a drawing (png, pdf, svg or jpg file) to plot with line-us. Actually to work with my own handmade drawings … --- ## [Could´t find the the "settings button"](https://forum.line-us.com/t/could-t-find-the-the-settings-button/434)
**Author:** [@Karl](https://forum.line-us.com/u/Karl)\ **Replies:** 2\ **Last updated:** [April 10, 2019, 10:16am UTC](https://forum.line-us.com/t/could-t-find-the-the-settings-button/434 "2019-04-10T10:16:00Z")
Hi, yesterday I download the app to my win10 runnigs system, without wifi. But I can´t find the “settings button” and the “set pen hight” button. It should be seen when push on the button right of the “Pause button”. Bu… --- ## [Sunday's auto drawing](https://forum.line-us.com/t/sundays-auto-drawing/424)
**Author:** [@jonny5alive](https://forum.line-us.com/u/jonny5alive)\ **Replies:** 4\ **Last updated:** [April 1, 2019, 10:31am UTC](https://forum.line-us.com/t/sundays-auto-drawing/424 "2019-04-01T10:31:04Z")
Did anybody else’s Line Us arm go a little strange with this Sunday’s automatic drawing download? --- ## [Is Line-us repairable?](https://forum.line-us.com/t/is-line-us-repairable/427)
**Author:** [@rob](https://forum.line-us.com/u/rob)\ **Replies:** 0\ **Last updated:** [April 1, 2019, 10:30am UTC](https://forum.line-us.com/t/is-line-us-repairable/427 "2019-04-01T10:30:28Z")
Yes, Line-us is repairable! If you’re feeling adventurous you can repair Line-us yourself, or your Line-us can be returned to us in London for repair if you’d prefer. If your Line-us needs a repair get in touch with us e… --- ## [Can't connect Line-Us to Virgin Media Hub 3](https://forum.line-us.com/t/cant-connect-line-us-to-virgin-media-hub-3/423)
**Author:** [@bowbrick](https://forum.line-us.com/u/bowbrick)\ **Replies:** 4\ **Last updated:** [March 31, 2019, 7:30pm UTC](https://forum.line-us.com/t/cant-connect-line-us-to-virgin-media-hub-3/423 "2019-03-31T19:30:27Z")
Hi, in setting up the new Line-Us, I get as far as connecting to the Line-Us (from the Mac app and from an iPhone), then selecting the 2.4GHz channel on the Virgin Hub (which provides both 2G and 5G channels) but then we… --- ## [Line-us not connecting ](https://forum.line-us.com/t/line-us-not-connecting/421)
**Author:** [@Steviebay](https://forum.line-us.com/u/Steviebay)\ **Replies:** 0\ **Last updated:** [March 22, 2019, 9:55am UTC](https://forum.line-us.com/t/line-us-not-connecting/421 "2019-03-22T09:55:02Z")
Hi I’m having trouble connecting Line-us to my WiFi. I’m using the app on an iPhone. I go through the set up choosing my WiFi put in my password. The app flashes green and says connected before unconnecting. HELLLLP… --- ## [Web sockets stops working after 6 commands](https://forum.line-us.com/t/web-sockets-stops-working-after-6-commands/413)
**Author:** [@jonny5alive](https://forum.line-us.com/u/jonny5alive)\ **Replies:** 6\ **Last updated:** [March 18, 2019, 9:59pm UTC](https://forum.line-us.com/t/web-sockets-stops-working-after-6-commands/413 "2019-03-18T21:59:40Z")
Hi I’m using web sockets to connect to my Line Us, and send movement commands with GCode. The movements work, and I receive an ‘ok X:1000 Y:750 Z:0’ after each command. But after usually 6 commands, it stops responding.… --- ## [My Line-Us on LetsRobot.TV](https://forum.line-us.com/t/my-line-us-on-letsrobot-tv/414)
**Author:** [@jonny5alive](https://forum.line-us.com/u/jonny5alive)\ **Replies:** 2\ **Last updated:** [March 18, 2019, 3:23pm UTC](https://forum.line-us.com/t/my-line-us-on-letsrobot-tv/414 "2019-03-18T15:23:50Z")
You can control my Line-Us here, if I’m online: https://letsrobot.tv/robocaster/lrj/robot/26226665 --- ## [Node Web Interface](https://forum.line-us.com/t/node-web-interface/139)
**Author:** [@jonny5alive](https://forum.line-us.com/u/jonny5alive)\ **Replies:** 5\ **Last updated:** [March 8, 2019, 10:19pm UTC](https://forum.line-us.com/t/node-web-interface/139 "2019-03-08T22:19:39Z")
HTML/JavaScript web interface and Node API server to let anyone on the Internet control the Line-Us robot: https://github.com/jonhassall/line-us-web --- ## [Share your works here!](https://forum.line-us.com/t/share-your-works-here/408)
**Author:** [@AmandaOrleander](https://forum.line-us.com/u/AmandaOrleander)\ **Replies:** 0\ **Last updated:** [February 11, 2019, 11:17am UTC](https://forum.line-us.com/t/share-your-works-here/408 "2019-02-11T11:17:19Z")
What about new pics for inspiration. I’ve recently started working with Line-us. I’ve been drawing at my designer’s notebook before. --- ## [Line-us App redesign](https://forum.line-us.com/t/line-us-app-redesign/353)
**Author:** [@carlhauser](https://forum.line-us.com/u/carlhauser)\ **Replies:** 5\ **Last updated:** [February 10, 2019, 12:52pm UTC](https://forum.line-us.com/t/line-us-app-redesign/353 "2019-02-10T12:52:40Z")
Hey, I love my line-us :), but I gave the app 2 or 3 stars in the appstore because it’s really confusing when you use it the first time and everything feels mixed-up. I think the focus should be on the drawing screen be… --- ## [Node.js and Browser JavaScript Library](https://forum.line-us.com/t/node-js-and-browser-javascript-library/344)
**Author:** [@beardicus](https://forum.line-us.com/u/beardicus)\ **Replies:** 11\ **Last updated:** [January 30, 2019, 1:30pm UTC](https://forum.line-us.com/t/node-js-and-browser-javascript-library/344 "2019-01-30T13:30:52Z")
Hey all! I’ve been poking at the Line-us’s new websocket interface for a bit and have finally published a JavaScript library that can be used in both the browser and Node.js: It’s still quite in-progress but it works … --- ## [Line-us flashing red even though connected and working fine](https://forum.line-us.com/t/line-us-flashing-red-even-though-connected-and-working-fine/233)
**Author:** [@funwithtriangles](https://forum.line-us.com/u/funwithtriangles)\ **Replies:** 5\ **Last updated:** [January 23, 2019, 6:29pm UTC](https://forum.line-us.com/t/line-us-flashing-red-even-though-connected-and-working-fine/233 "2019-01-23T18:29:32Z")
For some reason my Line-us is flashing red despite the fact it is connected to Wifi and receiving commands just fine. Any ideas? I’m on the latest firmware. --- ## [Device won’t turn on](https://forum.line-us.com/t/device-won-t-turn-on/374)
**Author:** [@ahmed](https://forum.line-us.com/u/ahmed)\ **Replies:** 6\ **Last updated:** [January 12, 2019, 10:01am UTC](https://forum.line-us.com/t/device-won-t-turn-on/374 "2019-01-12T10:01:57Z")
I connected the USB to a portable charger, it worked and everything was just fine. However after some time it suddenly stopped working now whenever I plug it into any sort of USB input it just won’t turn on (the button o… --- ## [Java connection issue](https://forum.line-us.com/t/java-connection-issue/358)
**Author:** [@bramborak](https://forum.line-us.com/u/bramborak)\ **Replies:** 4\ **Last updated:** [January 4, 2019, 9:55am UTC](https://forum.line-us.com/t/java-connection-issue/358 "2019-01-04T09:55:20Z")
hi, i’m constantly getting this error; java.net.UnknownHostException: line-us.local now i can’t do anything with scratch or processing etc. since i can’t connect line-us to anything. i tried to find a solution but no… --- ## [Not connecting to line us](https://forum.line-us.com/t/not-connecting-to-line-us/342)
**Author:** [@smithp01](https://forum.line-us.com/u/smithp01)\ **Replies:** 3\ **Last updated:** [December 26, 2018, 8:19pm UTC](https://forum.line-us.com/t/not-connecting-to-line-us/342 "2018-12-26T20:19:20Z")
Hi, I’m using an iPad. I have set up my account and followed the instructions to connect line us to my WiFi network. My iPad is connected to the same WiFi network as line-us. The blue light is steady. The icon on the ap… --- ## [How do I delete a sketchbook?](https://forum.line-us.com/t/how-do-i-delete-a-sketchbook/325)
**Author:** [@timdevg](https://forum.line-us.com/u/timdevg)\ **Replies:** 2\ **Last updated:** [December 19, 2018, 9:36am UTC](https://forum.line-us.com/t/how-do-i-delete-a-sketchbook/325 "2018-12-19T09:36:50Z")
I’d like to delete several sketchbooks I’ve accidentally created! --- ## [Controlling Line-us remotely?](https://forum.line-us.com/t/controlling-line-us-remotely/321)
**Author:** [@hcomet](https://forum.line-us.com/u/hcomet)\ **Replies:** 7\ **Last updated:** [December 18, 2018, 2:32am UTC](https://forum.line-us.com/t/controlling-line-us-remotely/321 "2018-12-18T02:32:04Z")
Hi, Wondering if there’s any way to connect to Line-us from a different Wifi network? I’d like to be able to send drawings to my family when I’m traveling (I would be connected to the internet and so would Line-us, just… --- ## [Lost sketch book](https://forum.line-us.com/t/lost-sketch-book/319)
**Author:** [@matt](https://forum.line-us.com/u/matt)\ **Replies:** 3\ **Last updated:** [December 16, 2018, 9:05pm UTC](https://forum.line-us.com/t/lost-sketch-book/319 "2018-12-16T21:05:57Z")
Hi there. Playing with the app I seem to have managed to delete a sketch book (oops). Not my own but one of the user shared books. How can I find it again? Cheers, Matt. --- ## [The right pen height](https://forum.line-us.com/t/the-right-pen-height/312)
**Author:** [@permesola](https://forum.line-us.com/u/permesola)\ **Replies:** 1\ **Last updated:** [December 13, 2018, 10:52pm UTC](https://forum.line-us.com/t/the-right-pen-height/312 "2018-12-13T22:52:21Z")
I find it difficult to find the right height for the pen. The result is that my drawings are always less precise than the ones I see online. What can I do? --- ## [Choosing the right pen](https://forum.line-us.com/t/choosing-the-right-pen/308)
**Author:** [@permesola](https://forum.line-us.com/u/permesola)\ **Replies:** 1\ **Last updated:** [December 11, 2018, 11:15pm UTC](https://forum.line-us.com/t/choosing-the-right-pen/308 "2018-12-11T23:15:16Z")
Hi, any suggestion about the right pen to use? I’ve tried several but I’m not very pleased with the result. Daniela --- ## [Line-us Advent Calendar](https://forum.line-us.com/t/line-us-advent-calendar/288)
**Author:** [@rob](https://forum.line-us.com/u/rob)\ **Replies:** 3\ **Last updated:** [December 11, 2018, 5:05pm UTC](https://forum.line-us.com/t/line-us-advent-calendar/288 "2018-12-11T17:05:00Z")
We’re launching the Line-us Advent Calendar today. Here’s a peek at the first drawing, with a little hand colouring to make it even more festive! If you’re running the latest firmware on your Line-us and haven’t changed… --- ## [Roadmap for the future](https://forum.line-us.com/t/roadmap-for-the-future/296)
**Author:** [@rsommerard](https://forum.line-us.com/u/rsommerard)\ **Replies:** 4\ **Last updated:** [December 9, 2018, 11:45pm UTC](https://forum.line-us.com/t/roadmap-for-the-future/296 "2018-12-09T23:45:16Z")
Do you have a roadmap for the future improvements? --- ## [Feeling a bit lost](https://forum.line-us.com/t/feeling-a-bit-lost/301)
**Author:** [@muggin5](https://forum.line-us.com/u/muggin5)\ **Replies:** 1\ **Last updated:** [December 9, 2018, 10:56pm UTC](https://forum.line-us.com/t/feeling-a-bit-lost/301 "2018-12-09T22:56:12Z")
I received my line-us robot this week and unboxed last night but aside from using the app, I can’t seem to do anything. I feel a bit lost. I’d like to have a go with Scratch but I follow the instructions and it just goe… --- ## [Open source hardware and firmware](https://forum.line-us.com/t/open-source-hardware-and-firmware/297)
**Author:** [@rsommerard](https://forum.line-us.com/u/rsommerard)\ **Replies:** 1\ **Last updated:** [December 7, 2018, 2:35pm UTC](https://forum.line-us.com/t/open-source-hardware-and-firmware/297 "2018-12-07T14:35:16Z")
Do you plan to open source the hardware and firmware? [Previous page](https://forum.line-us.com/latest.md?page=2) [Next page](https://forum.line-us.com/latest.md?page=4)