# Address for connection: "line-us.local" not working **URL:** \ **Category:** Programming and API\ **Created:** [June 13, 2018, 6:20pm UTC](https://forum.line-us.com/t/address-for-connection-line-us-local-not-working/70 "2018-06-13T18:20:23Z")\ **Posts on this page:** 1\ **Showing post:** 10
**Author:** ![rob](https://forum.line-us.com/user_avatar/forum.line-us.com/rob/32/8_2.png) [@rob](https://forum.line-us.com/u/rob)\ **Post date:** [December 19, 2018, 10:33am UTC](https://forum.line-us.com/t/address-for-connection-line-us-local-not-working/70/10 "2018-12-19T10:33:49Z")
I think there might be two separate things going on here: 1. Could you check the name of your machine in the app. Click on the Line-us icon: ![image](https://forum.line-us.com/uploads/default/original/1X/d562b338cf5fadd8fedeffda47a95d9c148b111a.png) Let me know whether it says connected or not connected, and what you get when you click on it. In the case below I’ve re-named my Line-us to line-us-rob, so you can either change to the new name - in my case line-us.local to line-us-rob.local or change the name back to line-us in Settings and keep your code the same. ![image](https://forum.line-us.com/uploads/default/original/1X/0755c79c18f52592311696c856f7f4dc8e8b58c2.png) Give that a try and let me know. For the red flashing, it’s probably the notification for the Daily Drawing. There are two kinds of flash: A short red flash every 2 or 3 seconds means there is a drawing ready to draw (just press the button to draw it - there’s a bit more information [here](https://forum.line-us.com/t/my-line-us-is-flashing-its-red-light/246). If it’s flashing quickly blue/red it means a firmware update has failed - unlikely but if you power off/on the machine it will clear it. On another note, have you changed the lift servo yet? I will put together some instructions today if you haven’t. --- _[View the full topic](https://forum.line-us.com/t/address-for-connection-line-us-local-not-working/70)._