# Calibration range

**URL:** <https://forum.line-us.com/t/calibration-range/603>\
**Category:** Support\
**Created:** [September 13, 2020, 10:30am UTC](https://forum.line-us.com/t/calibration-range/603 "2020-09-13T10:30:30Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Markus](https://forum.line-us.com/letter_avatar_proxy/v4/letter/m/b782af/32.png) [@Markus](https://forum.line-us.com/u/Markus)\
**Post date:** [September 13, 2020, 10:30am UTC](https://forum.line-us.com/t/calibration-range/603/1 "2020-09-13T10:30:31Z")

</div>

Hello!

I have recently tried to calibrate my 4 line-us devices. I was unable to get the right angle configuration with the pen over the hole on 2 of them, with the calibration range just stopping me from achieving it one or two clicks away (the button “right” was then greyed out).

Would it be possible to extent the calibration room somewhat? Any other suggestions what I could do?

Thank you,

Markus

---

<div class="post-metadata">

**Author:** ![rob](https://forum.line-us.com/user_avatar/forum.line-us.com/rob/32/8_2.png) [@rob](https://forum.line-us.com/u/rob)\
**Post date:** [September 13, 2020, 11:08am UTC](https://forum.line-us.com/t/calibration-range/603/2 "2020-09-13T11:08:02Z")

</div>

Hi Markus. There’s a workaround for this - hit save, then home and you’ll be able to go further. We set the range a bit too tightly and we’ll fix it in a future app release.