# Feeling a bit lost

**URL:** <https://forum.line-us.com/t/feeling-a-bit-lost/301>\
**Category:** Support\
**Created:** [December 9, 2018, 12:33pm UTC](https://forum.line-us.com/t/feeling-a-bit-lost/301 "2018-12-09T12:33:44Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![rob](https://forum.line-us.com/user_avatar/forum.line-us.com/rob/32/8_2.png) [@rob](https://forum.line-us.com/u/rob)\
**Post date:** [December 9, 2018, 10:56pm UTC](https://forum.line-us.com/t/feeling-a-bit-lost/301/2 "2018-12-09T22:56:12Z")

</div>

Hi, Sorry to hear you’re having problems. I’ve just check out the Scratch link and also saw the problem. I’ve just made a change and the link from [line-us.com/scratch](http://line-us.com/scratch) should work now. You will probably get a pop-up or button saying something like ‘Click to run Flash’. I’ve also changed the [scratch.line-us.com](http://scratch.line-us.com) link but that will take a while to update so stick to the one from the homepage for now.

You’re running the latest firmware on your Line-us (the version shown is the version installed, so 2.0.4 in your case) so you’re fine there.

For the import take a look at [Import of existing drawings](https://forum.line-us.com/t/import-of-existing-drawings/146/2) - that should be enough to get you started but let m know if you have any more questions.

…rob

---

_[View the full topic](https://forum.line-us.com/t/feeling-a-bit-lost/301)._