# Replacement Arm

**URL:** <https://forum.line-us.com/t/replacement-arm/552>\
**Category:** Support\
**Created:** [May 4, 2020, 11:06am UTC](https://forum.line-us.com/t/replacement-arm/552 "2020-05-04T11:06:38Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![PorkHaulage](https://forum.line-us.com/letter_avatar_proxy/v4/letter/p/ed655f/32.png) [@PorkHaulage](https://forum.line-us.com/u/PorkHaulage)\
**Post date:** [May 4, 2020, 11:06am UTC](https://forum.line-us.com/t/replacement-arm/552/1 "2020-05-04T11:06:38Z")

</div>

Hi There,

Is it possible to purchase a replacement arm and fit it yourself? I’m based in London UK so could even pick up from a local address.

Cheers,

Tom

---

<div class="post-metadata">

**Author:** ![rob](https://forum.line-us.com/user_avatar/forum.line-us.com/rob/32/8_2.png) [@rob](https://forum.line-us.com/u/rob)\
**Post date:** [May 4, 2020, 11:37am UTC](https://forum.line-us.com/t/replacement-arm/552/2 "2020-05-04T11:37:44Z")

</div>

Yes, definitely. It’s a complete dis-assembly of the Line-us to fit it and you’ll have to re-calibrate but if you’re up for it I can get you an arm. Worst case it all goes wrong and you can just send me the machine to fix. I can post one or if you’re around Clerkenwell we could arrange a distanced pick-up.

---

<div class="post-metadata">

**Author:** ![PorkHaulage](https://forum.line-us.com/letter_avatar_proxy/v4/letter/p/ed655f/32.png) [@PorkHaulage](https://forum.line-us.com/u/PorkHaulage)\
**Post date:** [May 4, 2020, 5:21pm UTC](https://forum.line-us.com/t/replacement-arm/552/3 "2020-05-04T17:21:30Z")

</div>

Brilliant thanks @rob any info on dissassembley and recalibration so I can judge against my ineptitude?

Happy to pedal to wherever you are to get the arms or drop off the kit (assuming i spoon it)

T

---

<div class="post-metadata">

**Author:** ![rob](https://forum.line-us.com/user_avatar/forum.line-us.com/rob/32/8_2.png) [@rob](https://forum.line-us.com/u/rob)\
**Post date:** [May 5, 2020, 11:01am UTC](https://forum.line-us.com/t/replacement-arm/552/4 "2020-05-05T11:01:23Z")

</div>

I don’t have instructions for arm replacement at the moment but the [lift servo ones](https://forum.line-us.com/uploads/short-url/yMGa2VCbBpaZogiDw3nRxKU8gWX.pdf) will give you an idea. To replace the arm you have to do most of this, then split the orange U section to remove the arms. Re-calibration is [done in the app](https://www.line-us.com/help.html#11) and isn’t difficult. If you’re up for it I can put together some instructions - will be a day or so. Alternatively you can drop off to me and it will take me about half an hour max to replace it. …rob