# Roadmap for the future

**URL:** <https://forum.line-us.com/t/roadmap-for-the-future/296>\
**Category:** Drawing and Ideas\
**Created:** [December 7, 2018, 11:07am UTC](https://forum.line-us.com/t/roadmap-for-the-future/296 "2018-12-07T11:07:41Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![rsommerard](https://forum.line-us.com/letter_avatar_proxy/v4/letter/r/ea5d25/32.png) [@rsommerard](https://forum.line-us.com/u/rsommerard)\
**Post date:** [December 7, 2018, 11:07am UTC](https://forum.line-us.com/t/roadmap-for-the-future/296/1 "2018-12-07T11:07:41Z")

</div>

Do you have a roadmap for the future improvements?

---

<div class="post-metadata">

**Author:** ![rob](https://forum.line-us.com/user_avatar/forum.line-us.com/rob/32/8_2.png) [@rob](https://forum.line-us.com/u/rob)\
**Post date:** [December 7, 2018, 2:41pm UTC](https://forum.line-us.com/t/roadmap-for-the-future/296/2 "2018-12-07T14:41:47Z")

</div>

We don’t at the moment as we’ve recently launched V2 which included lots of new features - public sketchbooks, machine subscriptions, web sockets, Scratch etc. We’re likely to just do small incremental changes where they make sense for a while so we can see the reaction to all of the new things we’ve put in. if you’ve got any specific ideas though do let us know…

---

<div class="post-metadata">

**Author:** ![rsommerard](https://forum.line-us.com/letter_avatar_proxy/v4/letter/r/ea5d25/32.png) [@rsommerard](https://forum.line-us.com/u/rsommerard)\
**Post date:** [December 7, 2018, 4:21pm UTC](https://forum.line-us.com/t/roadmap-for-the-future/296/3 "2018-12-07T16:21:06Z")

</div>

Ok fine. What about the implementation of the g02 gcode command?

---

<div class="post-metadata">

**Author:** ![rob](https://forum.line-us.com/user_avatar/forum.line-us.com/rob/32/8_2.png) [@rob](https://forum.line-us.com/u/rob)\
**Post date:** [December 9, 2018, 11:06pm UTC](https://forum.line-us.com/t/roadmap-for-the-future/296/4 "2018-12-09T23:06:26Z")

</div>

Yes, I’ll put that in the next version. There are a few features that are in 2.0.4 but aren’t documented yet so those will be documented also.

One example is M28/M29 that allow you to store a drawing in your Line-us. When you’re in ‘Red Mode’ pressing the button will draw the drawing. In fact the Rooster drawing that was on the postcard with your Line-us is already saved in all of the machines so if you go into Red Mode and press the buttons it should draw the Rooster for you.

There’s also a Webserver running on the Line-us, so (assuming you haven’t changed the name of your Line-us type [http://line-us.local](http://line-us.local) into a browser and you’ll get things like MAC address, calibration info etc.

---

<div class="post-metadata">

**Author:** ![rob](https://forum.line-us.com/user_avatar/forum.line-us.com/rob/32/8_2.png) [@rob](https://forum.line-us.com/u/rob)\
**Post date:** [December 9, 2018, 11:45pm UTC](https://forum.line-us.com/t/roadmap-for-the-future/296/5 "2018-12-09T23:45:16Z")

</div>

If you want to try saving drawings the commands are:

M28 Sn (where ‘n’ is the file number you want to save to, the rooster is in file 1 so M28 S1 will overwrite it)

Then, any Gcode will be saved to the file instead of being drawn.

M29 will close the file.

M30 Sn deletes file n

M20 lists the files